If you don't receive the e-mail within 5-10 minutes, please check your JUNK/SPAM folders.

Logging In

1. On future visits, you'll want to navigate to https://skillsusa.intelitek.com in order to access these materials again.
   
   
2. When the login page loads, enter the Username and Password you had created at sign-up in order to access the system.
   
   If you do not remember those details, you can use the Forgotten your username or password? link to reset your password.
   
   
3. When you've successfully logged in, you should course(s) in your Dashboard for CNC Milling for AMT or Robotics for RAT.
   
   
4. If you do not see a course for the contest you are participating in, continue to Self-Enroling into Course (next section)
   

Self-Enroling into Course

1. After logging in for the first time, your Dashboard may say there's no course information to show, so you'll want to enrol yourself into the necessary course.
   
   
2. Click on Site home in the left menu.  If you do not see the menu, click the hamburger icon in the top left to show/hide it.
   
   
   
3. Once Site home loads, scroll to the list of Available courses and click on the name for the content you are participating in.
   
1. For AMT, choose CNC Milling Technology for AMT
   
2. For RAT, choose Fundamentals of Robotics and Advanced Robotic Programming
   
   
4. Enrolment options will load, and if you scroll down you'll see a red 'Enrol me' button, click that to enrol yourself into the course!
   
5. Now that you're enroled, you have full access to the course resources to assist in preparation for your contest at SkillsUSA National Leadership Conference!
   

Installing LearnMate Agent (Windows OS required)

If using a school computer, an administrator account may be required to perform these steps.

Please ensure this is performed while IT is available in the event their assistance is required.

Intelitek personnel will not be able to resolve any issues if an Admin account is required.

In order to use CNCMotion or RoboCell without a license, you'll need to also have LM Agent installed.

1. LM Agent can be downloaded from here.
   
   
2. Installation is very straight forward, run the installer as an administrator and click next until finished.
   
   
3. Once installed, this application runs in the background and is not directly interfaced.
   

Installing CNCMotion or RoboCell (Windows OS required)

If using a school computer, an administrator account may be required to perform these steps.

Please ensure this is performed while IT is available in the event their assistance is required.

Intelitek personnel will not be able to resolve any issues if an Admin account is required.

If your school has its own CNCMotion or RoboCell license, you are free to use that software and can skip this section.

1. The software for your contest can be downloaded from the links below.
1. For AMT, CNCMotion V6 2020 can be downloaded from here.
   
2. For RAT,  RoboCell V7 2020 can be downloaded from here.
3. You must use these versions in order to license via the course, earlier versions of the software are not supported.
   To check the version:
1. Under Help > About the version
   
1. For CNCMotion needs to be 6.1.4.8 or higher
   
2. For RoboCell needs to be 7.0.14.0 or higher
   
2. The license activation window will display as seen below, with "2020".
   If 2020 is not there, you need to download a version linked above.
   
4. 
   
   
2. Once downloaded, run the installer as an administrator.
   
1. If using a school computer, you need to follow any school IT policies.
   
   

3. For CNCMotion, there are several selections to choose during the install:
   

   

   If attending a competition, also install CNCBase at this time.

1. CNCMotion for Intelitek CNC & Fanuc Emulator
   
   
2. BenchMill 6100
   
   
   
   
3. Can leave at default option.
   
4. Continue to click Next and Finish to perform the installation.
   
   

5. For RoboCell, confirm the following option is selected during the installation process.
   

   

   If attending a competition, also install ScorBase at this time.

   
   

   
   

6. Can leave the default options for any remaining selections.
   
   
7. Continue clicking Next and Finish to perform the installation.

Licensing CNCMotion or RoboCell from their course

If using a school computer, we highly recommend going through this process to confirm success while your IT department is available, should any changes to the computer be necessary.

With CNCMotion or RoboCell and LM Agent installed, you can license and launch the software from within the appropriate course at any time.

1. Login at https://skillsusa.intelitek.com
   
   
2. On your Dashboard, click the tile for your course.
   
1. If you don't see the course, please refer to the "Self-Enroling into Course" section above.
   
   
   
   
3. Once in the course:
   
1. For CNCMotion:
   
   
2. Click any Activity from 2 and up.
   
3. Select BenchMill 6x00
   
4. Choose Metric or Imperial
   
5. Click Start Activity
   
   
1. For RoboCell:
   
   
   
   
2. Click any Activity from 3 and up.
   
   
4. On almost all pages, you can use the "Launch" icon to download an .lma (LM Agent) file that will, when opened, launch and temporarily license CNCMotion or RoboCell for several hours of use.
   In the CNC Milling course, this icon is found in the top left corner under the home icon.
   In either Robotics course, this icon is found in the top right corner under the Glossary and Index.
          
   
   
5. When the icon is clicked, your browser will download a .lma file named to your browser's configured download folder.
   
1. You may be prompted to Save the file yourself, so choose an easily accessible folder on your computer, such as Downloads or Desktop.
   
   
   
6. Open the file, either through your browser or by opening the save folder and double clicking the file.
   
   
   
   
7. At this point, LM Agent will read the file in the background, launch and temporarily license CNCMotion or RoboCell for several hours!
   
1. If you encounter any issues with this process, please refer to our help article to check and fix file associations in Windows. (This may require administrator rights, so please follow your schools' IT policy if using school a computer.)
   
   
8. This .lma license file will expire after several hours, and so you will need to repeat the steps in this section to download another copy of the file in order to license the software again.